Split Clamp/Rubber Lined Clamp.

Application:

Split Clamp is recommended for non-insulated stationary pipelines in a horizontal position. It can be used for supporting pipes along with the roof.

Construction:

Split clamp lining consists of a piece of mild steel shaped to wrap around the pipe. The selection of the proper split clamp depends upon the load to be carried. Permits installation before and after the pipe is in place. Reduces noise up to 18 dB.

NOMINAL PIPE SIZE PIPE OD (MM) PIPE OD RANGE (MM) HANGER ROD SIZE (MM) SIDE SCREW SIZE (MM) MAX LOAD (KG)
1/2” DN15 21.3 20-25 M10 M6 460
3/4” DN20 26.7 26-30 M10 M6 460
1" DN25 33.4 32-36 M10 M6 460
1 1/4” DN32 42.1 38-43 M10 M6 460
1 1/2” DN40 48.2 47-51 M10 M6 460
2" DN50 60.3 60-64 M10 M6 460
2 1/2” DN65 73.0 74-80 M10 M6 570
3" DN80 88.9 87-92 M10 M6 570
Sizes: 3/4” to 8”

ENQUIRE NOW
Enquiry